Harrington Inc
Supply one LDH line with two
smaller lines; one clapper
. Call for pricing.
design. L. 101/2" • W. 10" • Ht. 5" • Wt. 10 lb.
Standard spring loaded relief valve.
Adjustable from 50 psi to 250 psi. Call for pricing.
Feed three small diameter lines
with a large diameter line. Relief
valve standard. L. 121/4" • W. 16" • Ht. 11" • Wt. 211/2 lb. Call for pricing.
This light-weight, compact unit is a
simple, economical way to feed
two small lines with one large line,
and continue with a large line.
All outlets are valved. Relief valve
and pressure gauge are standard. Call for pricing.
Supply one LDH line with three
smaller lines; each individually
clappered. L. 141/2" • W. 15" • Ht. 9" • Wt. 17 lb. Call for pricing.
Supply one LDH line with four
smaller lines; each individually
clappered. L. 15" • W. 19" • Ht. 9" • Wt. 21 lb. Call for pricing.
This light-weight, compact unit is a
simple, economical way to feed
four small lines with one large line,
and continue with a large line.
All outlets are valved. Relief valve
and pressure gauge are standard. Call for pricing.
A low-profile valve that incorporates all desirable benefits. Only nine turns to open or close, indicator to show position of the ball, relief valve and air bleed-off. Pressure drop is reduced to a minimum by the 30° angle inlet. Only 81/2" clearance required from the center of the truck connection to the bottom of the ball valve. Available with any thread or Storz Combination. Extension 12" • W. 8" • Ht. 16" • Wt. 34 lb. Call for pricing.
All standard and special thread
combinations are available. Chrome plating is available. Call for pricing.
All standard and special thread
combinations are available. Chrome plating is available Call for pricing.
All standard and special thread
combinations are available. Chrome plating is available. Call for pricing.
All standard and special thread
combinations are available. Chrome plating is available. Call for pricing.
All standard and special thread
combinations are available. Chrome plating is available. Call for pricing.
For use on valve inlets, the Harrington Full-Time Swivel (FTS) will swivel UNDER PRESSURE!
The primary application is on appliances that are placed on the ground, such as a manifold or ball valve. If the connecting large diameter hose is twisted, there may be a tendency to flip the appliance over when water reaches it. The Harrington Swivel Joint will reduce or eliminate this possibility. This product represents another example of our commitment to safety. The FTS can also be used on any valve...
This is a high quality gate
applications requiring a built-
without relief. This gate valve
includes an air bleeder. Extension 12" • W. 8" • Ht. 15" • Wt. 22 lb. Call for pricing.
This is a high quality gate valve for
applications requiring a built-in elbow with relief valve. This gate valve also includes an air bleeder. Extension 12" • W. 8" • Ht. 15" • Wt. 25 lb. Call for pricing.
One-Man Hose Roller designed
to quickly and easily remove air
and water from large diameter
hose prior to reloading. Smooth
operation and lightweightdesign. Folds for storage. Two-Man Hose Roller designed with dual handle grips and hinged open/close operation, for removal of air and water from large diameter hose prior to reloading. Call for pricing.
An economical means to gate a
2½" hydrant connection prior
to opening the hydrant, for additional water flow requirements. Call for pricing.
Supply one LDH line with two LDH lines; each individually clappered. L. 171/2" • W. 151/2" • Ht. 91/2" • Wt. 30 lb. Call for pricing.
This is a high quality LDH gate valve
for industrial hydrant or pumper use. Light-weight and compact, it
incorporates an air bleeder into
the non-rising stem design. Extension 111/2" • W. 10" • Ht. 161/2" • Wt. 37 lb. Call for pricing.
This unique valve permits the first-in pumper to lay the large diameter line directly from hydrant to fire and start pumping water. Later, if more pressure is required to boost the pressure at the hydrant to take full advantage of available water, another pumper can connect to the hydrant valve and start pumping with no interruption in flow. A third position provides emergency shut-down capability. Call for pricing.
Includes a built-in non-return
clapper. No lateral inlets, large
square base provides good stability.
Oblique outlet permits
better guiding of suction hose
through cellar windows, etc. Call for pricing.
Includes a built-in non-return
clapper. No lateral inlets, large
square base provides good stability.
Oblique outlet permits
better guiding of suction hose
through cellar windows, etc. Call for pricing.
All standard and special thread
combinations are available. Chrome plating is available Call for pricing.
All standard and special thread
combinations are available. Chrome plating is available. Call for pricing.
All standard and special thread
combinations are available. Chrome plating is available. Call for pricing.
Designed with metal sealing surface for permanent mounting on hydrants. Cap, cable and adapter included. Call for pricing.
Stainless Steel Piston & Cylinder. This truck inlet valve incorporates
quick-connection, fast but controlled
opening, with air bleeder and relief
valve. 45° inlet provides smooth
waterflow for reduced friction loss.
This valve is covered by a 10 year
warranty against failure due
to corrosion. Call for pricing.
This is a high quality gate valve for
hydrant or pumper use. Light-weight and compact, it incorporates an air bleeder into the non-rising stem design. Extension 10" • W. 8" • Ht. 15" • Wt. 22 lb. Call for pricing.
An economical means to gate a
2½" hydrant connection prior to opening the hydrant, for additional water flow requirements. Call for pricing.
Storz Caps with a brass, chrome
plated chain will keep your Storz
appliances clean, and provide a
tight seal for vacuum. Call for pricing.
Feed two large diameter lines with a single large diameter line. Relief valve standard. L. 161/2" • W. 243/4" • Ht. 12" • Wt. 50 lb. Call for pricing.
