Standard spring loaded relief valve. Adjustable from 50 psi to 250 psi. Call for pricing.
Stainless Steel Screens for Storz addaptors. Call for pricing.
Feed two large diameter lines with a single large diameter line. Relief valve standard. L. 161/2" • W. 243/4" • Ht. 12" • Wt. 50 lb. Call for pricing.
This unique valve permits the first-in pumper to lay the large diameter line directly from hydrant to fire and start pumping water. Later, if more pressure is required to boost the pressure at the hydrant to take full advantage of available water, another pumper can connect to the hydrant valve and start pumping with no interruption in flow. A third position provides emergency shut-down capability. Call for pricing.
This is a high quality gate valve for hydrant or pumper use. Light-weight and compact, it incorporates an air bleeder into the non-rising stem design. Extension 10" • W. 8" • Ht. 15" • Wt. 22 lb. Call for pricing.
This is a high quality gate valve for applications requiring a built-in elbow with relief valve. This gate valve also includes an air bleeder. Extension 12" • W. 8" • Ht. 15" • Wt. 25 lb. Call for pricing.
This is a high quality gate applications requiring a built- without relief. This gate valve includes an air bleeder. Extension 12" • W. 8" • Ht. 15" • Wt. 22 lb. Call for pricing.
This is a high quality LDH gate valve for industrial hydrant or pumper use. Light-weight and compact, it incorporates an air bleeder into the non-rising stem design. Extension 111/2" • W. 10" • Ht. 161/2" • Wt. 37 lb. Call for pricing.
Storz Caps with a brass, chrome plated chain will keep your Storz appliances clean, and provide a tight seal for vacuum. Call for pricing.
All standard and special thread combinations are available. Chrome plating is available. Call for pricing.
Stainless Steel Piston & Cylinder. This truck inlet valve incorporates quick-connection, fast but controlled opening, with air bleeder and relief valve. 45° inlet provides smooth waterflow for reduced friction loss. This valve is covered by a 10 year warranty against failure due to corrosion. Call for pricing.
This light-weight, compact unit is a simple, economical way to feed four small lines with one large line, and continue with a large line. All outlets are valved. Relief valve and pressure gauge are standard. Call for pricing.
Supply one LDH line with four smaller lines; each individually clappered. L. 15" • W. 19" • Ht. 9" • Wt. 21 lb. Call for pricing.
All standard and special thread combinations are available. Chrome plating is available Call for pricing.
Supply one LDH line with three smaller lines; each individually clappered. L. 141/2" • W. 15" • Ht. 9" • Wt. 17 lb. Call for pricing.
A low-profile valve that incorporates all desirable benefits. Only nine turns to open or close, indicator to show position of the ball, relief valve and air bleed-off. Pressure drop is reduced to a minimum by the 30° angle inlet. Only 81/2" clearance required from the center of the truck connection to the bottom of the ball valve. Available with any thread or Storz Combination. Extension 12" • W. 8" • Ht. 16" • Wt. 34 lb. Call for pricing.
*Feed two small lines with one large line. Call for pricing.
Call for pricing.
