Allegro®

Constant Flow Full Respirator Hood Systems are designed for easy handling and use. Complete with ambient air pump, supplied air respirator hood, breathing tube, belt 50ft. air hose, and all necessary fittings. Pumps are portable and oil-less, produce no carbon monoxide, oil vapor, or oil mist, and eliminate the need for carbon monoxide monitoring and alarm systems. Fully assembled and complete with filters, fittings and couplers.

Where air quality is especially low, this free-standing or wall-mounted particulate assembly helps extend the life of the filter panel’s disposable filters by removing liquids and contaminates down to 5 microns. It is equipped with an adjustable regulator pressure gauge and meets the NIOSH requirement for point-of-attachment.

Designed to protect an area 33" x 33", this 42" high guard rail collapses to only 27" square x 4" for easy storage. Weighing 34 lbs., the strong, one inch tubular .078 gauge steel construction is powder-coated in safety yellow for a durable finish and high visibility. Simple one-piece construction offers easy, no-tools assembly. Rail locks open and two hooking chains provide protected entry and exit.

Lift even the heaviest covers with ease. Takes the strain out of lifting heavy manhole covers. One-piece lifter features an all-steel handle with cadmium plating to fight rust. Rubbers grips on hand and foot prevent slips. Steel hook locks into the pole for safe storage.

Easy to use and very durable, the Deluxe Work Tent features quick set-up from the inside or outside with fiberglass rod frame. These frames are uniquely designed to not pull out or poke through the fabric. A handy attached roll-up flap provides compact storage, easy transport, and means no missing storage bag. Offered in three sizes, it is available in a one door design with zipper closure, or a two door design with one zipper and one roll-up door.

Provides a fast, safe and easy method to perform qualitative respirator fit check. When activated, the ampules give off a non-irritating odor of banana oil (Iso Amyl Acetate). If banana odor is detected by the wearer, the respirator must be adjusted or replaced. 10 ampules per box.

Iso Amyl Acetate (banana oil) offers the oldest method of testing respirator fit. Its strong, readily identifiable odor will be recognized if respirators don’t obtain a fit. The kit includes all the equipment necessary to perform a proper fit test, including a fit test tent, jars, 8 oz. testing agent, paper towels, disposable bags and other necessary components, all housed in a convenient storage and carry case.

Ensures a quick, safe, easy method for wiping respirators between full cleaning periods. Large (5" x 8"), individually foil-packaged towelettes contain 70% Isopropanol and are designed specifically for use on rubber respirator facepieces and other personal safety equipment.

Ensures a quick, safe, easy method for wiping respirators between full cleaning periods. Large (5" x 8"), individually foil-packaged towelettes contain 70% Isopropanol and are designed specifically for use on rubber respirator facepieces and other personal safety equipment.

Spray socks are available individually bagged with 12 spray socks in a handy dispenser box.

Reusable storage bags keep equipment contaminant free. Large (12" x 15") transparent bag with zipper for positive closure. Bags are made of tough 10 mil. Poly to last longer and hold half or full mask sizes. Cleaning instruction are printed on bag.

Belt mounted for carrying respirators, gloves, goggles and small tools. Constructed of lightweight nylon reinforced vinyl fabric with Velcro® closure to protect equipment from dust and moisture. Available in half mask and full mask sizes.

When the sweet taste of saccharin is detected, the respirator has failed its fit test. The Saccharin Fit Test Kit offers OSHA-compliant testing of disposable and reusable dust and mist respirators. It includes polycoated hood, two nebulizers, sensitivity and fit test solutions, and instructions. Replacement solutions are in ampules.

The Bitrex™ Fit Test Kit offers qualitative OSHA-compliant fit testing for disposable and reusable dust and mist respirators. Bitrex creates an unmistakable bitter taste that indicates break through in the respirator fit. Bitrex has been found safer than saccharin tests while producing identical results. Disposable glass ampules make pouring solution into nebulizers easier and reduces the chance of contamination.

For qualitative fit testing of air purifying respirators, this Smoke Test Kit offers everything needed for meeting OSHA’s protocol for fit testing with smoke. Includes irritant smoke tubes, aspirator assembly, and record form in a protective carry pouch.

The Deluxe Pump Smoke Test Kit includes a smoke fit tube pump with batteries which generates the required 200 ml per minute of smoke, six smoke tubes with caps, and instructions

Creates a concentrated area for qualitative fit testing. The tent features two openings for convenient respirator adjustment. A saturated towelette can be clipped and hung inside the tent when using it for an Iso Amyl Acetate test. Made of nylon reinforced material with a viewing window. 48" high and 24" diameter. Warning: Do not use tent with Irritant Smoke Test.

Designed to protect fire extinguishers from dust and harsh workplace environments. Made of high impact, corrosion resistant ABS. High visibility red case make locating easy. Holds all major extinguishers up to 30 lbs.

Convenient cleaning and storage for full face and half mask respirators. Contains ninety ½ oz. packets of water soluble cleaner, air bulb, bucket, brush, and 100 each sterile storage bags and seals, and large 17 quart, two sided bucket. Kit meets OSHA recommendations.

White case made of corrosion resistant ABS plastic and high visibility defibrillator graphics. Special features include 6" x 10" window and right hand door opening. Three optional slide in shelves.

Allegro® wall cases protect respirators against damaging plant environments. They are made of corrosion resistant ABS with ultraviolet inhibitors. Nonmetallic hinges and latches prevent rust while a rubber door seal protects equipment from dust and moisture. The Deluxe Case comes with shelf and single SCBA cylinder bracket. The Standard Case offers the same large capacity, without shelf or bracket.

Easy to transport and store, this durable rectangular carry bag features reinforced handles, shoulder strap and dual zipper entry. Internal padding protects SCBA and mask. Accessory zipper pouch and internal straps with side release buckle. Size: 30" long x 12" wide x 13" high

Generic One Door Storage Cabinet
Heavy-duty, steel cabinet includes three adjustable shelves, handle and inspection window. This durable, convenient cabinet also includes Label Kit with 17 custom labels. Exterior: 14"w x 13"d x 30"h
Interior: 13 3/4"w x 12 3/4"d x 29 3/4"h.Weight: 22 lbs.

Metal case comes in corrosion resistant electro-static white finish. Defibrillator graphics are dominantly displayed. Other features include a 13" x 13" window on door front, right hand door opening and turn latch. Also included is a battery operated audio alarm.

These cases are all made of corrosion resistant ABS with ultraviolet inhibitors. The rubber door seal protects against dust and moisture and the non-metallic hinges and latches prevent rust. You can customize these wall cases with the label kit.
Small Yellow Case with Label Kit and 1 shelf: Exterior: 14"w x 9 1/2"d x 18"h, Interior: 12"w x 7 1/2"d x 16"h, Weight: 3 lbs.