The Alpha™ Vest offers permanent FR protection inherent in our lightweight, breathable, wind-resistant and water-repellent Super Fleece™. With a CAT 4 protection rating and certified to meet NFPA 70E and NFPA 2112, this vest is all about big protection in a small package. Stay safe on the job without sacrificing the comfort and warmth you need to beat the cold.

*Grey* Developed to provide superior comfort and freedom of movement in non-stop work environments, this 4-way-stretch hoodie is an ideal mid-layer or outerwear garment for the demands of any season. Ride out hazardous weather in comfort and style wearing our NEW Elements™ Cyclone Pull-Over Hoodie. Constructed from DragonWear® Inherent Tri-Blend Elements™ FR Fabric, a wind-repelling outer surface and durable water-resistant finish guards against fierce weather.

Fabric Shell: Flame-resistant, 4.5 oz. (150 g/m²) Nomex® IIIA (93% Nomex® Aramid / 5% Kevlar® Aramid / 2% Other Fiber) Lining: 100% Meta-Aramid, Insulation Package: 10.0 oz. (340 g/m²) 90% Aramid / 10% FR Rayon-Sizes S-3XL. Four concealed snap-front closures, Rib-knit collar, Two large inset slash-welted pockets, One inside chest pocket, Snaps into JNJ8, JLB8, JMJ4 and JLJ8 jackets, sold separately. Care Home Wash and Light Soil Wash

Separating, heavy-duty, Nomex® taped brass zipper, fully covered with two-layer storm flap, concealed snap closure › Fully insulated stand-up collar › Knit storm cuff within hemmed sleeve ends › Two large external patch pockets, with concealed snap secured flaps with hand warmers › One inside chest pocket › Deep-pleated action back › Fully-tunneled elasticized waistband › Inside zipper guards on all zippers. Fabric Shell: Westex Ultrasoft® Flame-resistant 7 oz.

Fabric Shell: Westex Ultrasoft® Flame-resistant 11.0 oz. (375 g/m2) Duck, 88% Cotton / 12% Nylon, Water-Repellent. Lining: Flame-resistant 6.5 oz. (220 g/m2) 70% Nomex® / 30% FR Lenzing®-Sizes S-3XL. Concealed snap-front storm flap closure, Self fabric lay-flat collar, Concealed snap closure on cuff, Four large patch pockets, One inside chest pocket, Lanyard access opening on center back, accommodates safety harness, Accommodates snap-on hood HLH2BD, sold separately.

This lightweight CAT 3 bomber-style jacket is fully lined to keep you warm and safe in the field. Featuring separating, heavy-duty Nomex® taped brass zipper, fully covered with updated collar and storm flap construction. Updated cuff. Two external patch pockets, with concealed snap secured flaps with hand warmers. Inside chest pocket. Left sleeve pocket. Utility loops at shoulder. Deep-pleated action back. Elasticized waistband.

The Exxtreme™ jacket has Rip-Stop Nomex® reinforcement patches on the forearm and the shoulder area for increased wear resistance. Armpit zippers allow for increased ventilation options and greater body temperature control. The Exxtreme™ offers durable yet breathable warmth that's fire-resistant, heavily wind resistant and sheds light rain and snow. The permanent protection won't melt, drip, or support combustion in the air.

The Super Fleece™ Alpha™ Jacket offers permanent FR protection inherent in a durable, wind-resistant construction that sheds light rain and snow. With a CAT 4 protection rating and dual-certified to meet both NFPA 70E & 2112 standards, the Alpha™ Jacket keeps workers warm and protected across a variety of industries. And if that sounds like a lot for one jacket to offer, then you're just starting to understand why the Alpha™ is your go-to garment both on and off the job.

Adapt to shifting conditions with versatile facial protection in this CAT 2 UPF 50+ Shape Shifter™ Neck Tube. Features : Fire and Arc-resistant-Protects against breathing in environmental elements-UPF 50+ rated sun protection-4 way stretch for freedom of movement-versatile design provides multiple options for wearing-Increased wash and wear durability-Tagless for true comfort experience-Anti-odor Silver Plus® technology.

Full zip sherpa vest with nomex brass zipper and storm flap. 11 oz. 88% Cotton/12% Nylon with DWR finish| Sherpa: 13 ox. 75% Wool/25% Modacrylic.

Hood with drawstring closure, Zipper front, Rib knit cuff and waistband, Fully lined with waffle lining, Hand-warmer unlined pockets. Outer Fabric: Flame-resistant, 12.5 oz. (425 g/m²) 95% Cotton/5% Spandex Brushed Fleece. Waffle Lining: Flame-resistant, 7.6 oz. (260 g/m²) 100% Cotton Waffle Texture Knit. Arc Rating EBT 54 calories/cm².

Non-conductive, Nomex® tape zipper with storm flap, Attached three-piece hood with drawstring, Knit cuff and waistband, Two large exterior welt pockets, Two inside chest pockets, Seams triple-needle topstitched, Quilted insulation. Shell: Flame-resistant 13.0 oz. (403 g/m²) Duck, 100% cotton. Insulation: Flame-resistant 5.5 oz. (170 g/m²) modacrylic blend. Arc Rating ATPV 46 calories/cm².

360 visibility with front and back 2 inch flame resistant heat seal silver reflective striping. Knit waffle lined. Three piece hood with drawstring closure. Rib knit cuff and waistband. Large hand warmer pocket, concealed utility pocket inside front pocket. IQ reinforcement at interior of sleeves. Flame-resistant Shell: 10.5 oz. (355 g/m²) 67% Modacrylic / 29% Cotton / 4% Polyester. Lining:7.0 oz. (240 g/m²) 55% Modacrylic / 45% Cotton lining. Arc Rating ATPV 35 calories/cm².

Full zip fleece jacket with zipper garage, Large Napoleon chest pocket with zipper closure, Right front chest patch pocket with iQ Endurance durability. Enhanced storage with zipper closure pockets, Pencil stall pocket on each sleeve. Flame-resistant, 12.5 oz. (425 g/m²) 95% Cotton / 5% Spandex. Arc Rating EBT 17 calories/cm².

Double layers, Comfortable, Fit to wear under hard hat. Flame-resistant, 10.5 oz. (360 g/m²) Modacrylic knit.

Our Livewire™ Beanie provides lightweight warmth and is designed to be worn comfortably under a hard hat.

Bring on the wind, rain, or snow. The Elements™ FR Dual Hazard Sweatshirt redefines what you can expect with a wind-resistant outer fabric surface, and a durable water-repellent finish to block wind and shed light rain and snow. Comfort, stretch and durability will make this garment your go-to sweatshirt.

Featuring Polartec’s® time-tested Wind Pro® FR fabric, this jacket redefines high expectations with its durable, wind-resistant and water-repellent finish designed to block wind and shed light rain and snow.

*Navy* Developed to provide superior comfort and freedom of movement in non-stop work environments, this 4-way-stretch hoodie is an ideal mid-layer or outerwear garment for the demands of any season. Ride out hazardous weather in comfort and style wearing our NEW Elements™ Cyclone Pull-Over Hoodie. Constructed from DragonWear® Inherent Tri-Blend Elements™ FR Fabric, a wind-repelling outer surface and durable water-resistant finish guards against fierce weather.

*Women's* True female fit › Enhanced storage with zipper closure pockets › Modern styling with contrast stitching. Arc Rating EBT 17 calories/cm². Fabric Flame-resistant, 12.5 oz. (425 g/m²) 95% Cotton / 5% Spandex.

Full zip fleece jacket with zipper garage › Large Napoleon chest pocket with zipper closure › Right front chest patch pocket with iQ Endurance durability feature to clip or hang badges or tools from › Enhanced storage with zipper closure pockets › Modern styling with contrast stitching › Pencil stall pocket on each sleeve. Fabric Flame-resistant, 12.5 oz. (425 g/m²) 95% Cotton / 5% Spandex. Arc Rating EBT 17 calories/cm².

Two-way, separating, heavy-duty Nomex®, taped brass zipper, fully covered with insulated storm flap, concealed snap closure › Fully insulated stand-up collar › Knit storm cuff with hook-and-loop suppression tabs › Three large patch pockets with concealed snaps (lower pocket with handwarmers) › One inside chest pocket › Sleeve pocket › Deep-pleated action back › Elastic inserts at waist across back › Internal snow belt. Fabric Shell: Westex Ultrasoft® Flame-resistant 7 oz.

The Elements Flak™ Jacket is an innovative fusion of DragonWear's exclusive Elements™ and IronShield® FR fabrics and provides superior weather protection and excellent durability in the most rugged of work environments. This hooded hybrid offers CAT 3 protection that combines the best features of a versatile, hooded outer layer with a one-of-a-kind, built-in fleece balaclava.

The Livewire™ Beanie provides lightweight warmth and is designed to be worn comfortably under a hard hat. Made with an exclusive Livewire™ fabric to offer improved protection, comfort, and performance.

Navy Detachable Hood For Parka, 3M® Thinsulate™ Liner