Navy blue Fall Protection Carrying Bag 7.5 in wide x 6.5 in deep x 15.5 in long can hold up to 50 ft of 5/8" rope

Lightweight Salalift® II Winch for rescue and work support 60 90 and 120 ft. lengths available

The Saddle Vent takes up only 3 inches in a manhole and functions as an air conduit. An eight inch air hose is attached to both ends of the Saddle Vent and placed in the entry access hole, thus eliminating the need to remove the hose each time entry or egress is required. The saddle Vent’s unique air flow design does not reduce air flow to the worker.

This electric blower features a GFI power cord, a 3/4HP electric motor,115 VAC, 12 amp, 750 low/1570 high cfm free air delivery, an 8” intake and exhaust flange, an aluminum non-sparking blower wheel, a powder coat steel frame and steel safety guards. Its weight is 64 pounds, size is 20”Wx 19”H x 19”D.

This 2-speed electric ventilation kit has a 3/4 HP motor with 115 VAC, 12 amp, 2 -speed TEFC motor, low 1140 rpm, high 1725 rpm, and a built-in GFI on/off power cord. Cfm free air is low 750/ high 1570. with duct it is 490 low/ 1047 high. The kit is supplied with a blower, an industrial style Saddle Vent, 15 ft. duct, 6 ft. duct, a duct canister that holds 50 ft. of duct, a universal mount and a 90 degree elbow. Approximate weight is 64 pounds.

Air systems manufactures a combination ventilation fan and duct storage unit to meet the most demanding customer needs. The rugged polyethylene duct cannister is securely attached to one of our rugged lightweight fans to make an ideal ventilator for the customer who wants a one piece ventilation system. The AC version, SVF-8AC, has a 1/3 HP -115 VAC, an 8” diameter outlet and 1395 cfm free air.

Air systems manufactures a combination ventilation fan and duct storage unit to meet the most demanding customer needs. The rugged polyethylene duct cannister is securely attached to one of our rugged lightweight fans to make an ideal ventilator for the customer who wants a one piece ventilation system. The AC version, SVF-8AC, has a 1/3 HP -115 VAC, an 8” diameter outlet and 1395 cfm free air.

This kit has the minimum equipment for the entrant, attendant, stand-by rescuer, main-line operator and belayer to set up systems for vertical entry into a confined space for both rescue and patient transport. For a complete confined space solution, add or use your own communication, gas monitor, and ventilation equipment. PRODUCTS INCLUDED

Manufactured by Skedco, makers of the Sked® Stretcher, the Sked-EVAC tripod features aircraft-grade, gold-anodized aluminum legs and a cast-aluminum head. Three heavy-duty rigging anchors, located in the center, have exceptionally large holes for easy attachment. Legs adjust in 5-in (127-mm) increments for a maximum height of 10 ft (3 m) and a minimum length for transport of 7 ft (2.1 m).

Recently revised, the CMC Confined Space Entry & Rescue Manual is the textbook for confined space rescue courses taught by the CMC Rescue School. It is the official textbook for the California State Fire Marshal’s state certified confined space rescue courses, and the training manual of choice for fire departments and industrial rescue teams nationwide.