Ergodyne

N-Ferno 6475 Insulated Freezer Coveralls are built for warm, durable and comfortable protection in cold storage freezer environments. Designed with 100% ripstop polyester and a water-resistant PU coating, these insulated coveralls stand up against the harshest conditions to provide warmth without restricting movement and dexterity.

The N-Ferno 6476 Insulated Freezer Jacket is built for warm, durable and comfortable protection in cold storage freezer environments. Designed with 100% ripstop polyester and a water-resistant PU coating, this cooler jacket stands up against the harshest conditions to provide warmth without restricting movement and dexterity. This insulated work jacket features two lower exterior oversized pockets, pen/stylus holder, mic tab and 2 d-rings for convenient access and storage.

N-Ferno 6477 Insulated Freezer Bib Overalls are built for warm, durable and comfortable protection in cold storage freezer environments. Designed with 100% ripstop polyester and a water-resistant PU coating, these insulated bibs stand up against the harshest conditions to provide warmth without restricting movement and dexterity. These work bibs have 2 oversized side pockets for easy access when wearing gloves.

ProFlex 850 Insulated Freezer Gloves are built to keep your hands warm and comfortable in cold storage freezer environments. The palms and fingers feature a silicone pattern and reinforced thumb saddles for extra-strength grip and durability in rough environments. Comfortable neoprene cuffs and lightweight insulation offer full dexterity for all-day use.

Skullerz 8952 Hard Shell Bump Cap is crafted with a durable polyethylene shell and is engineered to guard against bumps, scrapes, bruises and other minor head injuries. The material not only resists cracking and breaking but also simplifies cleaning for added convenience. A ventilated suspension system enhances overall breathability and air circulation, making it an ideal choice for all-day use.

The GloWear 8353 Hi-Vis Softshell features a 100% polyester shell with PU coating for water- and wind-resistant protection from the elements. A soft polar fleece lining adds warmth and comfort for cool environments and thumb loops trap heat and keep sleeves in place. Unlike typical boxy and bulky hi-vis gear, this lightweight jacket is designed for a more athletic fit.

Skullerz 8951 Vented Hard Shell Bump Cap is crafted with a durable polyethylene shell and is engineered to guard against bumps, scrapes, bruises and other minor head injuries. The material not only resists cracking and breaking but also simplifies cleaning for added convenience. Strategically placed shell vents and a ventilated suspension system enhances overall breathability and air circulation, making it an ideal choice for all-day use.

Tool Lanyards are a part of an overall fall protection plan to reduce the risk of falling objects and increase workplace safety. When working at-heights, it’s essential to tether tools. High-capacity lanyards are a piece of safety equipment designed to attach one end securely to a fixed anchor point, and the other to an appropriate attachment point on a tool by proper tethering.

Tool Lanyards are a part of an overall fall protection plan to reduce the risk of falling objects and increase workplace safety. When working at-heights, it’s essential to tether tools. High-capacity lanyards are a piece of safety equipment designed to attach one end securely to a fixed anchor point, and the other to an appropriate attachment point on a tool by proper tethering.

Tool Grips and Tethers are a part of an overall fall protection plan to reduce the risk of falling objects and increase workplace safety. When working at-heights, it’s essential to tether tools. Tool Grips and Tethers are a piece of safety equipment with defined weight limits, built for secure attachment to tools. The plated D-ring acts as a captive hole for tethering tool lanyards.

The TREX 6315 Strap-On Heel Traction Cleat are ice grips for boots and shoes with rugged steel plates that turn boot heels into ice picks, leaving the mid-foot free for vehicle operation.

TREX Mid-Sole Ice Cleats are lightweight ice grips for boots and shoes that provide tenacious traction and extra stability on ice and snow. When not in use, the ice cleats easily rotate to the top or side of boot or shoe to make for easy transitioning from outdoor to indoor, and prevent damage to surfaces and equipment. These mid-sole ice cleats feature 6 rugged tungsten carbide studs (12/pair) that are molded in for extra-firm grip on icy and snowy terrain.

The N-Ferno 6804 Skull Cap Winter Hat with LED Lights is a premium compression knit beanie hat with four built-in dual-action LED lights, making it an ideal hands-free lighting solution for any cold weather situation.

ProFlex 7501 Coated Waterproof Winter Work Gloves & 7551 Coated Waterproof Cut-Resistant Winter Work Gloves
These styles are dual layer for warm, waterproof, cut-resistant protection in cold temperatures. Wet hands are cold hands. These coated gloves feature a full waterproof latex dip that protects you from the elements by keeping water and cold air out, with a second layer of sandy nitrile on the palms for abrasion-resistance and enhanced grip without compromised dexterity

The ProFlex 1675 Back Support Brace not only promotes proper lifting techniques but also offers versatile hot/cold therapy. ProFlex back supports are designed to remind workers of proper lifting techniques while also enhancing the body's intra-abdominal pressure, moving the stress away from the spine. Featuring 480D spandex body material with a v-shaped design, this back support brace provides a firm level of support and also features mesh material on the backside for increased airflow.

The Chill-Its 6700CT Cooling Bandana features polymer crystal cooling technology for relief in extreme heat. Lightweight and low-profile, this comfortable cotton bandana is perfect for wear around the neck or under hard hats. A tie closure in the back makes for an adjustable, snug fit on a variety of head sizes.

The Chill-Its 6602 Evaporative Cooling Towel features advanced PVA cooling technology for relief in extreme heat. When wet, this towel remains lightweight and comfortable for bulk-free wear around the neck or head.

The Chill-Its 6700 Cooling Bandana features polymer crystal cooling technology for relief in extreme heat. Lightweight and low-profile, this comfortable cotton bandana is perfect for wear around the neck or under hard hats. A tie closure in the back makes for an adjustable, snug fit on a variety of head sizes.

The Squids 3201 Fall Restraint Harness & Lanyard Kit is designed specifically for use with mobile elevating work platforms (MEWPs), such as boom, scissor lifts and other applications where fall restraint is required. While fall arrest systems protect a user when a fall occurs, a fall restraint system prevents you from reaching a fall hazard by connecting the user’s harness to a reliable, stable anchor system.

The GloWear 8231TVK Hi-Vis Tool Tethering Safety Vest Kit - Type R Class 2, Dual Certified provides versatile tethering and storage options for working at heights. Intended for tethering tools under 2lbs, this safety vest is dual certified for both ANSI/ISEA 121-2018 and ANSI/ISEA 107-2015 compliance. Unlike other hi-vis vests worn underneath fall protection harnesses, this surveyor’s vest is designed to be worn over the top of the system.

The Squids Anchor Choke Strap threads through railings, scaffolding, equipment and structures to create a retrofit attachment point for tethering tools up to 60lbs // 27kg, preventing dropped or falling objects from occurring on the job. Intended for heavy tools, this strap should only be affixed to the worksite (not for fall arrest). Built for lasting security, this anchor strap features heavy-duty abrasion-resistant polyester webbing and a durable steel D-ring.

The Squids 3105 Single Carabiner Tool Lanyard features a locking screw-gate captive-eye aluminum carabiner on one end and a low-profile cinch loop on the other to tether tools up to 15lbs // 6.8kg and prevent dropped or falling objects from occurring on the job.

The Topped Tool Pouch with Snap-Hinge Closure houses tools, small parts and hardware. The one-handed snap-hinge opening offers safety and security. An innovative modular buckle connection system on the back easily connects to standard tool belts and fall protection harnesses without the worker having to remove them. Tool lanyards can be attached to two D-rings on the holster for additional safety and security. Can be used as both a tool pouch, tool bag or bolt bag!

The GloWear 8381 is a Type R Class 3, 4-in-1 Hi-Vis Winter Bomber Jacket that can be worn multiple ways for ultimate adaptability in changing weather. Zip out the liner to wear it alone as a lightweight fleece jacket, zip off liner sleeves for wear as a vest, wear the shell on its own as a lightweight weatherproof layer or leave the liner zipped in to wear as a warm winter work jacket.

The GloWear 8377 Type R Class 3 Hi-Vis Winter Bomber Jacket is designed with a polyester outer shell + PU coating for water- and wind-resistant protection from the elements, plus 160g thermal quilted insulation for comfortable no-bulk warmth. The inset hood features drawstrings and stoppers for a custom fit, and can easily be zipped in or out depending on weather conditions or personal preference. Adjustable hook & loop cuffs seal out cold and allow for comfortable wear with gloves.