3M OH&ESD

Nuisance level organic vapor/acid gas relief

Easy to use. Easy to buy assembly of commonly used components. Long run times. Durable belt. The TR-616N assembly includes motor/blower (TR-602N), high capacity battery (TR-632), length adjusting breathing tube (BT-30), high durability belt (TR-626) and airflow indicator (TR-971). Headtops, filters, cartridges and battery charger sold separately.

Resealable storage bag helps keep respirator clean between uses. Low profile design provides wider field of vision and greater comfort while wearing goggles or glasses. Can be used with NIOSH P95 and P100 filters for oil and non-oil particles. For convenience and simplicity some 3M respirator package assemblies are packaged with either P95 or P100 filters along with 501 filter retainers or 502 filter adapters

Unique design for enhanced comfort and visibility

Directs exhaled breath and moisture downward. Smooth surface allows for quick and easy cleaning. Helps reduce debris from depositing in valve area. Available with negative pressure and dual airline modes only. Cool Flow Valve design helps makes breathing easier. Helps reduces heat and moisture buildup in the facepiece. Helps provide cool dry comfort

Helps protect the lens

Remarkably comfortable with soft lightweight facepiece and the easy-to-adjust head straps. Reusable. Just dispose of the cartridges/filters when used to capacity. NIOSH approved for negative pressure air purifying and positive pressure dual airline applications. Supplied as a complete assembly with reclosable storage bag

Half facepiece drop down. Used with 2000 6000 and 7000 Series filters and cartridges. Remarkably comfortable with soft lightweight facepiece and the easy-to-adjust head straps. Reusable. Just dispose of the cartridges/filters when used to capacity

Use to seal DIN ports

Use to seal DIN ports

These facepieces can be used with 2000 6000 and 7000 series filters and cartridges. Material provides soft cushioning on face. 3M™Cool Flow™Exhalation Valve is a patented one-way valve offering easy exhalation for cool dry comfort. Interchangeable filters enable wearer to match the filter with the application

And easy-to-use maintenance-free respirator that includes a carbon layer to remove nuisance acid gas odors and the Coolflow™ Exhalation Valve for easier exhalation and heat reduction. Adjustable M-noseclip helps provide secure fit over nose. Meets 42CFR84 Standard for P95. Sold 00 per box.

Used to hold 3M™5N11 and 5P71 Filters in place on 3M™5000 Series Respirators and 3M™6000 Series cartridges

Replacement high efficiency particulate filters for 3M™ Adflo™Powered Air Purifying Respirator (PAPR).

Regulate the flow of compressed air to 3M™L-Series Headgear. Allows the wearer to set the airflow to the most comfortable level. Requires up to 15 cfm at pressure rating depending on hose length

Added chest and shoulder clearance when turning and lowering head. Face protection to reduce the risk of splash spray and light impact. Good chemical resistance. Windows mount inside crown for added support. WE96S -Short clear PETG

Dual airline

Magnifying power on both the upper AND lower lens helps make reading and other close work easier. Adjustable soft tip temples feel good even after extended wear. High impact lens blocks 99.9% UV. Lens angle adjustability. Soft universal-fit nose bridge

Adjustable soft tip temples feel good even after extended wear. High impact lens blocks 99.9% UV. Lens angle adjustability. Soft universal-fit nose bridge

Band helps prevent loss and is ideal for intermittent use. Conically-shaped plugs provide a comfortable fit. Dermatologically safe plugs are non-irritating. No hinged band

Use as a replacement part for 3M™ Full Facepieces 6000 Series. Use to seal 3M™ Center Adapter Assembly 6892 or 3M™ DIN Port Adapter Assembly 6884 to facepiece.

Save time and increase productivity with Centurion ®Tear-N-Wear™ goggles. Based on the proven technology used in professional racing, the patented Tear-N-wear view strip uses a clear adhesive system that gives wearers a clean, distortion-free view again and again. Ideal for painting, plastering, cement or grinding dust environments, this eyewear couples a wide viewing area with excellent heat, chemical and scratch resistant lenses for the finest in safety and practicality.

Designed to filter and regulate normal plant air. Simple single-step filtration. Easy to mount. 3-5 outlets

Under the chin non invasive comfortable hearing protection yellow foam replaceable pods

Can be worn in any of three positions (Over-the-Head Under-the-Chin Behind-the-Head). Comfortable effective will not interfere with hard hat or glasses

Patented shape to more effectively fit in the ear canal. Soft comfortable foam

Patented grip-ring design softly hold plug in place. Easy-grip handle for easy insertion and removal

EARsoft with SuperFit fitting ring. Soft polyurethane earplug

Dermatologically safe foam is non-irritating to the skin. Exciting designs and brilliant colors. Self-adjusting foam provides low pressure with excellent attenuation

then expand within the earcanal to help reduce noise exposure. Test compatible with 3M™ E-A-Rfit™ Validation System. These uncorded foam earplugs offer a soft low-pressure solution for comfortable wear

Flame-retardant. Foam is non-irritating. Moisture resistant. Shape prevents shifting and keeps effectiveness of noise seal constant. Slow recovery PVC foam provides comfort with low pressure

Flame-retardant. Foam is non-irritating. Moisture resistant. Offers the highest NRR available. Shape prevents shifting and keeps effectiveness of noise seal constant. Slow recovery PVC foam provides comfort with low pressure

Moisture resistant dermatological safe foam is not irritating. Slow recovery PVC foam provides comfort with low pressure

Dermatologically safe foam is non-irritating to the skin. Self-adjusting foam provides low pressure seal. Soft smooth design foam for ultimate comfort for small ear canals

Breakaway cord. Design eliminates fear of hand-to-ear contamination. Designed for excellent attenuation on the job. Less foam provides exceptional comfort less pressure and less sound distortion. Reusable or disposable. Slow recovery foam insert easily seats and stays in place. Soft flexible grips for easy insertion and removal. With blue grips

The new ONE TOUCH features the most reliable delivery system in the world. The patented ™No Waste Funnel™ system allows users to reuse both the base and dispensing unit

No roll down Earplugs. Plus since the the unique foam actually softens and becomes more pliable with body temperature the seal and comfort increases the longer the plugs are worn. The patented E-A-Rform foam tip is shaped and sized to mold comfortably to fit virtually every sized canal

Conforms to oval shape of ear. No rolling or touching plug portion during insertion. Patented flange design gives most comfortable fit of any reusable earplug. Washable promotes worker hygiene. Cloth cord

Conforms to oval shape of ear. No rolling or touching plug portion during insertion. Patented flange design gives most comfortable fit of any reusable earplug. Washable promotes worker hygiene. Metal detectable plug and cord

The new E-A-R Push-In SofTouch brings together the ergonomic insertion convenience of the “pistol-grip” stem with the softest, most comfortable tip on the market. The SofTouch takes our Push-Ins product line to a whole new level with a noise busting NRR of 31 dB!

This valve is used with the 3M™ Half Facepiece Respirators 7000 Series, and also used with the 3M™ Center Adapter 6864 on the 3M™ Full Facepiece Respirators 6000 Series. 00/Case

The E-A-R EXPRESS® Pod Plugs practically insert themselves, there's no rolling down needed. The patented InstaSeal system assures the user a great fit, while using less foam for a more comfortable feel. The E-A-R EXPRESS Pod Plugs deliver
excellent protection with an NRR of 25 dB.

Smooth dirt resistant surface for hygiene. Tapered shape to fit the ear canal comfortably. Comfortable for a wide range of ear sizes. Hypo-allergenic material. Can be combined with ear muffs for additional protection. Soft braided cloth cord provides worker comfort helps prevent loss and reduces sound vibrations from the cord. Cord drapes comfortably without twisting or binding

Dual airline

Use with 3M™ Full Facepiece Respirators 6000 Series. It permits the wearer to use his/her corrective lenses and to make position adjustment that is most comfortable.

This assembly is designed to be used with the 3M™ Half Facepiece Respirators 7501, 7502 and 7503.

This is a replacement inhalation valve designed for 3M™ Half Facepiece Respirators 7500, 7502, and 7503.

The L-Series is a new family of headgear that is available in bump cap, hard hat and helmet options. The bump cap and hard hat versions are available in wide view lens, welding and combination of both lenses. The helmet version is available in wide view lens and wide view lens with welding shield. All of the L-Series headgear works with the 3M™ GVP-Series PAPR and 3M™ Supplied Air Systems. NIOSH approved.

Equipped with MPT fittings at both ends and accepts 1/4 inch FPT fittings. Supplied Air System approvals allow for 100 foot lengths of this hose to be combined up to a maximum of 300 feet

Replaceable orange gasket used on the 3M™ Full Facepiece Respirators 6000 Series and 7800S.

Switching time is less than 40 microseconds. Auto shutoff is after 20 minutes without switching

3M™Cool Flow™Exhalation Valve is a patented one-way valve offering easy exhalation for cool dry comfort. Faceseal is comfortable to wear and contours easily to help provide a good seal. Adjustable noseclip provides a custom fit secure seal and reduces the potential for eyewear fogging. Lightweight construction contributes to increased wear time. Easily fits under faceshields. Buckle adjustable straps provide a comfortable secure fit with a single tug

Adjustable noseclip and nose foam to help provide a custom fit and secure seal. Low priced N95 that features Advanced Electret Media

Adjustable noseclip and nose foam to help provide a custom fit and secure seal. Low priced N95 that features Advanced Electret Media

Use as a replacement part for 3M™ Full Facepieces 6700, 6800, 6900 (07038, 07039, 07040 AAD). Sold 5 per case.

This eyewear offers the classic look of a dual lens with a soft nosepiece and integral side-shields for profile protection . Other features include anti-fog hard coat lenses and a cushioned brow bar for added safety and comfort. The readers offer the same classic looks and features of the Nuvo™but with the added convenience and magnification strength of +1.50 diopter for help reading the small print. Meets ANSI Z87.1 and CSA Z94.3 standards . Sold by the box of 10 pair.

Brow bar offers cushioned protection. Classic look of a dual lens with soft nosepiece. Integral side-shields for profile protection

With one gentle turn, choose from the widest variety of the most popular earplugs available in any earplug dispenser today. With an extremely reliable delivery system, the One Touch™incorporated a patented "No Waste Funnel" system that allows users to reuse both the base and dispensing unit.

These over-the-glass visitors spectacles exceed ANSI Z87.1 and CSA Z94.3 high velocity standards. They offer the fullest view in over-the-glass specs with sleek nylong temples for superior comfort and high impace polycarbonate construction for durability and protection. Made in the USA. Sold by the box of 10 pair.

Recommended for substance specific particle exposures up to 10x OSHA PEL for lead cadmium arsenic and others. 3M™Cool Flow™Exhalation Valve is a patented one-way valve offering easy exhalation for cool dry comfort. Faceseal is comfortable to wear and contours easily to help provide a good seal. Adjustable noseclip provides a custom fit secure seal and reduces the potential for eyewear fogging. Lightweight construction contributes to increased wear time.

Recommended for nuisance level acid gas relief. 3M™Cool Flow™Exhalation Valve is a patented one-way valve offering easy exhalation for cool dry comfort. M-noseclip adjusts easily with fewer pressure points and greater comfort reduces the potential for eyewear fogging. Lightweight construction contributes to increased wear time. Braided straps provide comfort and durability

Easy-to-Use small, lightweight monitors clip easily to shirt lapel, collar, or pocket and don't interfere with employee activities. Contains no batteries, hoses, pumps, or equipment to calibrate. Works simply on the diffusion principle for chromatography lab analysis. Choose monitors for organic vapors, ethylene oxide, or formaldehyde. Organic vapors monitor can measure more than 128 organic vapors. Complies with OSHA standards. Manufactured in an ISO 9002 facility.

Extremely easy to apply retrieve and reuse these pads are double the standard thickness and recommended for congested areas such as under docks in shallow water rocky shorelines marshes and beaches. Pads can also be used to wipe off oil-contaminated rocks boats and equipment. Like rolls they are ideal for in-plant use in place of clay granules

Complete lightweight mobility cool, comfortable respiratory protection you can wear almost anywhere! Motor and airflow unit with HEPA filter are mounted directly on the front of the facepiece for complete mobility. Positive pressure reduces breathing resistance and keeps user cool and comfortable. HEPA filter protects against airborne particulates and resists moisture for longer use. System includes full facepiece respirator, motor blower unit, battery pack, flow meter, and HEPA filter.

Complete lightweight mobility cool, comfortable respiratory protection you can wear almost anywhere! Motor and airflow unit with HEPA filter are mounted directly on the front of the facepiece for complete mobility. Positive pressure reduces breathing resistance and keeps user cool and comfortable. HEPA filter protects against airborne particulates and resists moisture for longer use. System includes full facepiece respirator, motor blower unit, battery pack, flow meter, and HEPA filter.

Sleek European inspired styling. Soft DuoForm molded nosebridge and temple tips for all day comfort

3M™ Qualitative Face Fit Test products offer a simple, direct way to meet OSHA qualitative fit-testing requirements. They can be used with any particulate or gas/vapor respirator with a dust/mist pre-filter to check face-to-respirator seal. They readily help satisfy OSHA respiratory protection program requirements and are easily used during respirator training. Two types of testing agents are available; saccharin (sweet) or Bitrex™ (bitter).

Recommended for nuisance level acid gas relief. Braided straps provide comfort and durability. Adjustable noseclip provides a custom fit secure seal and reduces the potential for eyewear fogging

Ratchet headgear for use with any 3M™ Faceshield. High-strength thermoplastic crown provides impact resistance and face protection. Adjustable ratchet suspension with five position crown strap. Adjustable ratchet suspensionFive position crown strap. Headgear gives users a wide choice of faceshield materials sizes shapes and tints for task specific requirements. Offers durable head protection to workers in metalworking utilities wood working and many other industries.

Head harness replacement strap assembly. Sold Individually.

Durable molded black plastic case with inside hinge straps and wide top pocket for extra literature. It is easy to carry and convenient to use. All FT-10 materials. 3M™Universal Fitting Instruction video. All 3M respirator fitting posters. Administrative respiratory protection guide

Wipes contain alcohol

Integrated suspension models offer the advantage of being fully assembled and ready to use straight out of the box. The integrated suspension models also feature a wide faceseal with soft elastic for improved comfort and reduced noise. The new airflow distribution minimizes the potential for air whistling past the wearer’s ears allowing for better worker communication and improved comfort

Feature the innovative 3M™Quick Release Swivel (QRS) connection. The QRS connects quickly to the headgear and swivels to minimize loops and kinks in the breathing tube. The new 3M™BT-20 Breathing Tubes feature steel core coils for durability

Mineral-coated slip-resistant material features a highly durable surface. Low-profile design reduces trip hazard. For use on smooth flat surfaces

Enhance safety by providing good traction for steps slippery walkways and other areas where people must work. Mineral coating creates a slip-resistant material
that is highly durable and long-lasting. Applies easily by simply removing the protective liner from the pressure sensitive adhesive and pressing in place

Replacement outside protection plate for 3M™ Speedglas™Filters Utility and 9000 Series. 10 per pack.
Replacement sweatband in plastic for 3M™ Speedglas™Helmets 9000 Series, FlexView, ProTop and ClearView.

Replacement outside protection plate for 3M™ Speedglas™Filters Utility and 9000 Series. 00 per pack.
Replacement sweatband in plastic for 3M™ Speedglas™Helmets 9000 Series, FlexView, ProTop and ClearView.

Provides a wide field of view. Paint and stain-resistant lens 3M's exclusive Scotchgard™coating causes some liquids to bead up on the surface so they can be wiped off easily. Bonded silicone gaskets eliminates loose gaskets that can be lost. Easy to use respirator attachments twist on and off easily for quick assembly and disassembly. Low profile bayonet design. Soft silicone nose cup and faceseal. Patented 3M™Cool Flow™exhalation valve

Contoured flexible temples for comfortable fit. Lightweight - Less than 1 oz. Sleek - Styling with both men and women

Contoured flexible temples for comfortable fit. Lightweight - Less than 1 oz. Sleek - Styling with both men and women

Corded earplug Control System Designed to keep eyewear & earplugs attached

Keep workers comfortable by cooling supplied air by as much as 50°F. Requires up to 20 cfm at 60-90 psi depending on hose length. Wearer can adjust levels of air flow