Respiratory Accessories

Nuisance level organic vapor/acid gas relief

Easy to use. Easy to buy assembly of commonly used components. Long run times. Durable belt. The TR-616N assembly includes motor/blower (TR-602N), high capacity battery (TR-632), length adjusting breathing tube (BT-30), high durability belt (TR-626) and airflow indicator (TR-971). Headtops, filters, cartridges and battery charger sold separately.

Unique design for enhanced comfort and visibility

Helps protect the lens

Use to seal DIN ports

Use to seal DIN ports

Used to hold 3M™5N11 and 5P71 Filters in place on 3M™5000 Series Respirators and 3M™6000 Series cartridges

Lighter and softer facepiece is made from a clear blue formulation of thermoplastic rubber to give the workers more comfort and stability then ever

Their swept-back design provides improved vision and comfort. These low-profile flexible pads fit well under a welding hood and with other personal protective equipment

Advantage line of particulate chemical and combination cartridges are lightweight low profile performance. Cartridges fit both 200 LS Half Mask and 3000 Full-Facepiece Advantage respirators. Comfortable 3000 and 4000 Full-Mask Respirators

For workers who must wear corrective lenses. Easily inserts into facepiece. Can be used with a nosecup. S-7 shape 44 mm lens spectacle frame. Simple adjustments position lens

Regulate the flow of compressed air to 3M™L-Series Headgear. Allows the wearer to set the airflow to the most comfortable level. Requires up to 15 cfm at pressure rating depending on hose length

Dual airline

N-Series Gas and vapor cartridges for use with North reusable air purifying respirators.

Use as a replacement part for 3M™ Full Facepieces 6000 Series. Use to seal 3M™ Center Adapter Assembly 6892 or 3M™ DIN Port Adapter Assembly 6884 to facepiece.

These filters and cartridges are compatible with MSA Comfo Classic, Ultra-Twin, Ultra Elite Twin, and Duo-Twin reusable respirators. Particulate filters and vapor cartridges are NIOSH-rated and installed in reusable half-mask or full-face respirators to filter out airborne contaminants. They are selected based on the environment and type of respiratory hazards that need to be filtered. They can be changed out when they become dirty or when the type of contaminant changes.

Designed to filter and regulate normal plant air. Simple single-step filtration. Easy to mount. 3-5 outlets

Cotton Flannel Faceshield Bag

This valve is used with the 3M™ Half Facepiece Respirators 7000 Series, and also used with the 3M™ Center Adapter 6864 on the 3M™ Full Facepiece Respirators 6000 Series. 00/Case

N-Series filters and retainers. For use with North reusable Air Purifying Respirators.

N-Series filters and retainers. For use with North reusable Air Purifying Respirators.

Dual airline

This assembly is designed to be used with the 3M™ Half Facepiece Respirators 7501, 7502 and 7503.

This is a replacement inhalation valve designed for 3M™ Half Facepiece Respirators 7500, 7502, and 7503.

Equipped with MPT fittings at both ends and accepts 1/4 inch FPT fittings. Supplied Air System approvals allow for 100 foot lengths of this hose to be combined up to a maximum of 300 feet

Replaceable orange gasket used on the 3M™ Full Facepiece Respirators 6000 Series and 7800S.

Switching time is less than 40 microseconds. Auto shutoff is after 20 minutes without switching

N-Series Gas and vapor cartridges that come combined with a P100 filter. For use with North reusable air purifying respirators.

Low profile fits under welding helmets and faceshields. They are flexible enough to fit in even the tightest spots yet still firm enough to easily perform negative pressure user seal checks

Feature the innovative 3M™Quick Release Swivel (QRS) connection. The QRS connects quickly to the headgear and swivels to minimize loops and kinks in the breathing tube. The new 3M™BT-20 Breathing Tubes feature steel core coils for durability