Anchorage Connectors

The Edge™ by Miller is the first and only cost effective, portable, engineered anchorage solution designed to protect the workers in leading edge deck construction. The Edge™ reduces the need for a safety monitor or a temporary cable lifeline system on leading edge deck construction. The unit has a freestanding, mobile overhead anchor point. Solid Althane™ wheel castors allows for ease of positioning. Two integral eye bolt attachment points accommodate self-retracting lifelines.

The Miller 10K Swivel Hybrid Anchor combines the technology of the new Swivel Anchor and the Miller Grip™ Anchor, resulting in a high-strength Swivel Anchor that can be removed and simply re-installed in a new location. Ultimate Tensile Strength: 10,000 lbf. Maximum User Weight: 310 lb. Working Load: 2,000 lb.

Built to meet the site-specific needs of various industries, FallTech multi-purpose anchors are designed for a wide variety of temporary and permanent applications.

-1-3/4" wide Nylon Webstrap
-3" Scuff Guard
-2" and 3" pass-thru D-Rings
-Standard Lengths are 3' and 6'

A personal fall arrest system is nothing without a tie off point. Steel, concrete, wood, metal deck…all present challenges when it comes to anchoring your personal fall arrest system. We have developed a wide range of anchorage solutions for even the most challenging work environments.

FallTech connectors are tested to comply with current ANSI standards and built for a wide range of workplaces. FallTech has worked hard to make sure that when you need to be connected, you have the right equipment for the job.

Disposable anchor - when no longer needed, simply cut off strap and discard. Disposable anchor strap is designed to provide a temporary anchorage on concrete forms. Loop on end of anchor slips over rebar; concrete is then poured on top of loap and wear pad.

One of the most common challenges in creating a safe at-height working environment is the establishment of a safe anchorage point for attachment of a personal fall arrest system. Often the only approved anchorage points exist overhead, out of reach of workers.

Anchorage connectors are designed as the intermediary for securing a connecting device to an anchorage. Model 415 is a 1/2 inch diameter D-bolt, 1-1/4 inch long, one-piece unit with lock washer and nut. Model 416 D-bolt anchor is for up to 4 inch working thickness and includes a 5/8 inch diameter bolt with lock washer and nut.

Made from quality materials and engineered for safety,
FallTech’s wide range of roof anchors are designed to be
safe, easy to use and cost-effective.

Allows for one step, one hand installation. One-piece design is simple, lightweight and compact. Accommodates 1-5/8" (4.1cm) wide strut. Includes visual indicator that anchorage is installed correctly and ready for use (Reflective tape visible from ground level with artificial light source). Rugged and corrosion resistant stainless steel. 3M™ DBI-SALA®Saflok™ included.

Made from quality materials and engineered for safety,
FallTech’s wide range of roof anchors are designed to be
safe, easy to use and cost-effective.

Pass-through design makes attaching to anchorage quick and easy. 1-3/4" polyester strength member (5,000 lb. Min. tensile strength). 3" wide polyester wear pad for added abrasion resistance and product longevity. Coated steel hardware for corrosion resistance and strength. It’s 17 inches in length, and fits 3" maximum diameter structure Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359. Sold individually.

Provides an anchorage connection for your fall protection system. Choose the length that best fits your needs. Tie-off straps, with pass through D-ring, are designed to wrap around a beam or similar structure. 400 lbs maximum capacity. Complies with OSHA and ANSI Standards.

FallTech’s SteelGrip® beam clamps feature lightweight, ergonomic, EasyGrip latch assemblies for quick installation and ease of adjustment. Employing alloy steel jaws and nylon slider pads, SteelGrip Beam Clamps offer a high degree of mobility and smooth trailing behind the worker

A personal fall arrest system is nothing without a tie off point. Steel, concrete, wood, metal deck…all present challenges when it comes to anchoring your personal fall arrest system. We have developed a wide range of anchorage solutions for even the most challenging work environments.

Stainless steel Wire Hook connects to various approved anchorages including railings, small I-beams, angle iron and scaffolding. Simply squeeze the spring-loaded hook and slip the large opening over the approved structure. 400 lbs maximum capacity. Complies with OSHA and ANSI Standards.