Ridgid®

819 Nipple Chuck Kit holds short or close nipples for threading. Holds studs for threading. For use with 300 Power Drive, 300 Compact, 535 and 1822 (with adapter kit) and 1224 Threading Machines. Standard Nipple Chuck includes insert and 5 adapters: 1/2", 3/4", 1", 1-1/4", and 1-1/2" (Nipple Chuck body serves as 2" adapter)
These taps are especially suited for restricted area work. All taps have taper of 3/4" per foot
Designed for use in restricted spaces on small diameter
Fully floating forged hook jaw. Heat-treated replaceable jaw. Jaw opening parallel to handle. Easy spin nonstick adjustment nut. Instant grip/release
Instant grip/release. Heat-treated replaceable jaw. Easy spin nonstick adjustment nut. Fully floating forged hook jaw. Replaceable hook and heel jaws
The 456 Tri-Bender is designed to easily bend three different sizes of soft tubing with the same tool. A 90°start angle minimizes effort required to form a bend. Handy reference marks indicate the angle for quick bends through 90°
Nearly 50% lighter than comparable cast-iron models of the same size. Features a jaw opening parallel to the handle. Narrow hook jaw head provides easy entry into tight spots
Stands shown below can be used on RIDGID® threading machine Model Nos. 300 Compact
Ratchet knob indicates forward and reverse. Die heads snap in from both sides and lock in place
Cut schedule 10/40 steel pipe
Designed for portability. Integral carrying handle makes transporting easy. Legs can be opened and closed in one simple motion. Locking latch automatically engages when closing the stand
Wrench parts: Always insist on genuine RIDGID parts
Hex jaw design gives multi-sided secure grip on all hex nuts square nuts unions and valve packing nuts. Extra-wide opening offset model is ideal for securing drain nuts on sinks and tubs
Ergonomic grips on bottom handle are spaced at 1/2" increments to act as a quick pipe measuring scale. Easy turn-thumb latch for reliable storage. X-CEL° quick change blade
Holds closet spuds and bath basin and sink strainers through 2". Use to install or extract 1" through 2" nipples. Jaws expand by eccentric action and are reversible for various sizes
High-strength bow design resists twisting. Accepts 12" blade either at 45°or 90°cut angles. Comfort grips fore and aft for better control and power
Cools threads and pipe during operation. Speeds metal removal. RIDGID thread cutting oils are free of chlorine and other halogens
No. 2-S spiral ratchet reamer is self-feeding spiral design for extra-fast and easy hand reaming please note 2S reamer is not suitable for use with power tool. Nos. 2 and 3 ratchet reamers have long taper design that will not dig in suitable for use with power drives. No. 254 spiral ratchet reamer has hollow center for reduced weight for manual reaming only cannot be used with power drives
Extra long shank protects adjustments threads while an extra-large handle is provided for quick easy adjustment. Can be converted to 3-wheel cutter by replacing rollers with cutter wheel. 2A ad 4S can be ordered as 3-wheel model for use in areas where a complete turn is not possible
One handed adjustment. Rapid ratcheting action. Agressive tooth design for secure grip. Thumb trigger for easy application and removal
Manual roll groover for in-place field applications. Requires only 3 1/2" of clearance to travel around a pipe. With the appropriate roll sets can groove from 1 1/4" to 12" pipe
Spring-loaded jaws of forged steel provide fast one-hand ratcheting. Tension plug holds head in any position up to 90°angle. Telescopic shanks on Model Nos. 1017 and 1019 quickly adjust for lengths form 10" to 17"
All flaring tools listed are recommended for soft materials such as aluminum and soft copper. No. 454W
is lighter than metal and does not rust
Nearly 40% lighter than comparable cast-iron models. Jaws and all other parts identical to Ridgid heavy duty wrenches
Narrow toothless jaw to fit into tight areas. For square or rectangular stock
Safely and quickly starts and stops the machine by depressing or releasing foot pedal
All die heads complete come with selected dies and are set at the factory
Clean square cuts are easily made on copper brass aluminum and thin-wall conduit. Nos. 10 15 20 feature a convenient fold-away reamer. No. 30 is rated for larger diameter steel and stainless steel tubing. No. 15-SI is especially designed for stainless steel tubing
Automatic chuck with four reversible forged jaws. 3-speed transmission. Large 1.75 gallon oil reservoir. Large chip tray. Generous top cover for keeping tools and fittings handy. High clearance carriage. Can be used with geared threader Model 141. Uses Model 816/817 semi-automatic, Model 815A self-opening or Model 811A quick-opening die heads. Length gauge for quick, accurate cut-off. Switches: FOR/OFF/REV and integral safety foot switch. Reamer: 5-flute cone, RH, 1/8"-2". Oil Pump:...
Can be mounted onto the RIDGID 300 Power Drive or be used manually. New patented auto-tracking technology for easier grooving. Includes a permanently-fixed depth setting gauge for quicker repeatable set-up
Offset cushion grip handles eliminate knuckle cracking when forming 180°bends. A 90°start angle and unique oil absorbing shoe minimize bending effort while forming accurate bends in copper steel and stainless steel tubing
141 threads 2 1/2", 3" 3 1/2", 4" pipe with one set of dies. 161 threads 4", 4 1/2", 5", 6" pipe with one set of dies. Jaw clutch prevents jamming. Simple adjustment for tapered or straight threads. Cam-type workholder set instantly. Fully enclosed gearing. Righ hand only
A full range of heavy-duty adjustable pipe stands are available in varying configurations with capacity from 1/8 - 36"
Precise clamping action. Rolled double lead acme screw. Steel handle with rubber anti-pinch rings. Large capacity pipe jaws. Constructed of 75
Designed and sized to provide extra leverage for the toughest jobs. All models feature double-end jaw styles which can be reversed
Heavy-duty hand-held power drive. Features reversible 115V or 230V universal motor. Designed for RIDGID No. 12R die heads; other RIDGID die heads (OOR,OORB, 11R) using adapters, threading 2 1/2 - 6" with 141/161 geared threaders. Switch: Double-throw reversible. Gear Head: All-spur gear reduction, spring loaded adapter pawl, hardened steel spindle gear. Body: Cast aluminum
Designed for rapid cutting of 2" through 12" steel pipe. Operates where minimal cutter rotation is necessary due to lack of space. Equipped with 4 cutter wheels. Furnished with X-tra sharp wheel for up to 40% faster cutting
Switch: Heavy-duty FOR/OFF/REV and integral foot switch. Chuck: RIDGID speed chuck with replaceable rocker-action jaws. Rear Centering Device: Cam-action turns with chuck. Support Bar: Heavy-duty (2)
Features an enclosed feed screw to eliminate clogging and jamming grooved rolls for close-to-flare cuts. Fold-away reamer. Made from high strength zinc alloy with a spare cutter wheel in the handle. Cuts copper brass and aluminum tubing and thin-wall conduit. Model 205 has a quick-acting mechanism
Chain Tong & Strap Wrench Parts & Accessories
Make easy work of removing broken threaded ends of pipe pipe plugs and fittings
Quick acting design I-beam construction hardened wear surfaces and thrust bearing slide assemblies for smooth operation. Now includes X-CEL° knob and X-CEL° pin for quicker cutting and wheel replacement. Models 151 and 152 features fold-away reamers. Spare cutter wheel included in knob
Measurement scales (in. on front
Yoke and base made of strong
The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15 ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job-site requirements. The 918 mounts quickly to RIDGID 300 power drive, 535, 1822, or 1224 Threading Machines. Designed to provide maximum efficiency, the 918 is capable of grooving up to 12" Schedule 10 and 8" Schedule 40 standard wall pipes. Roll Set changeout is accomplished in seconds
Large 1.75 gallon oil tray. 100% larger chip tray. Generous top cover for keeping tools and fittings handy. High clearance carriage. Speed chuck with rocker-action jaws centers and grips workpiece instantly. Can be used with geared threaders Models 141 and 161. Uses Model 816/817 semi-automatic, Model 815A self-opening or Model 811A quick-opening die heads. Length gauge for quick, accurate cut-off. Switches: FOR/OFF/REV and integral safety foot switch. Rear Centering Device: Cam-action, turns...
Ideal for jobs in tight quarters and for working on closely spaced lines. Aluminum handle makes the wrench 40% lighter than other malleable iron wrenches
(NPSM) National Pipe Straight Mechanical - Use (NPT) Dies and Rotate Threader Guide Post 180° (BSPP) British Standard Pipe Parallel - Use (BSPT) Dies and Rotate Threader Guide Post 180°
True centering workholder. Jam-proof. Right hand only
All threaders sets use same 12-R dies in die head
Rare-earth magnets five times stronger than standard strip magnets. Glow surround view for easier reading of vials in dark or shadowed areas
Replacement bolt cutter heads for Ridgid model "S" series cutters
Telescoping feed screw design keeps the cutter at the same length regardless of tubing diameter ° good for tight spaces. Features an enclosed feed screw to eliminate clogging and jamming grooved rollers for close-to-flare cuts and a fold-away reamer. Now includes X-CEL° knob and X-CEL° pin for quicker cutting and wheel replacement. Spare cutter wheel included in the knob
Strong woven nylon strap gives tight grip. Two models available for plastic pipe. Polyurethane-coated strap prevents scratching. Replaceable straps available. Strap designed for use with plastic pipe
Patent pending X-CEL° blade for fast single stroke cutting no twisting or ratcheting required. Durable construction for heavy duty use
These tools, with high geared mechanical ratios, bend heavy-wall steel tube (up to 1/8" wall thickness), stainless steel tube (up to 3/32" wall thickness), and hard copper water tube (types K and L). Benders produce uniform bends up to 180°, with no need to anneal tubing or use special temper grade tubing
All die heads are through-head oiling. No. 500A Die Head replaces the No. 500 Mono Die Heads. Idividual machine die heads do not include dies
Cuts 1 1/2"-6" clay cast-iron cement pipe and 4" class 22 water main. Ratchet-action handle parallel to pipe allows for application in trenches of minimum width. Complete with hand guard to protect operator°s knuckles when cutting
Featuring extra-wide rolls this cutter is especially designed for use with power drives. The wide rolls provide for true tracking and cleaner cuts
Flat surface is ideal for occasional use as a hammer. Fully floating forged hook jaw. Easy spin nonstick adjustment nut. Instant grip/release. Deep broad hook jaw housing. Heat-treated replaceable jaw
Pipe rest. 3-pipe benders. Tool slots. Clear tool swing. Ceiling brace screw. Folding legs and tray. Vise base overhangs front legs
Rugged cast-iron base has handy pipe rest and bender. Crank handle is anchored to base
Shown on optional No. 200A stand. Threads 1/4"-2" pipe at 36 RPM and 2 1/2"- 4" at 12 RPM. The 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C. An induction motor helps insure sound levels well within the limits set by the regulating authorities. A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material...
Double jaw gives fast ratchet-like action in either direction. Heavy-duty model has replaceable alloy steel jaws. Light-duty model has a one piece forged alloy steel handle and jaw
300 Compact shown with optional Model 250 Folding Wheel Stand. Heavy-Duty proven performance. Lightweight, portable design. Fast transporting and set-up. Self-contained oil system with adjustable flow control. Versatility for threading and grooving. Motor Control: Heavy duty rotary FOR/OFF/REV with integral foot switch. Chuck: Hammer-type with replaceable, rocker-action jaw inserts. Oiling System: Through-the-head, with integral oil reservoir, self-priming, constant-flow, gerotor pump. Cutter:...
Precision made of flexible heavy-duty fiberglass with embedded, easy-to-read boldface figures and graduations with 16" stud marks and positive locking joints. No. 1602 is graduated on one side in millimeters with red markings every 10 cm, reverse side reads in inches
Rugged cast-iron base. Pipe bender. Pipe rest. Crank handle is anchored to base
Designed for work in areas where a complete turn is impossible. No. 42-A has a short handle for use in areas where only a 130° turn can be made. Second handle on No. 44-S makes two man leverage possible on large pipe sizes. Both equipped with four heavy-duty wheels